DIY Bathtub Tray

WHAT YOU WILL NEED

-Scrap Wood
-Stain
-Sander/Sandpaper
-Handles
-Vinyl Decal

HOW TO MAKE IT

Step 1: The first step is to sand down your piece of scrap wood. Using an electric sander will make this step much easier but isn’t necessary. After you’ve finished sanding, make sure you use some tack cloth to wipe down your wood and remove all of the dust particles left behind.
Step 2: Using your chosen stain, apply one coat wiping it on and then off to make sure that you get rid of any excess. Let the stain completely dry. After it’s dry, do a second coat of stain using the same method.
Step 3: Next you’ll add the handles by gluing them on the bathtub tray with tacky glue. Make sure to quickly wipe away any excess glue that runs out when you glue on your handles.
Step 4: Lastly, apply your decal by placing it wherever you desire on your bathtub tray. These are easily found on Etsy if you’re not able to make one yourself.

Similar Posts